How Do I Find the Factory Code for My Ford F150 Keyless Entry?
If you own a Ford F150 equipped with keyless entry, you may find yourself in a situation where you need to access the factory code. The factory code is a unique numeric combination that allows you to program additional keyless entry remotes or reset the existing ones. In this article, we will guide you through the process of finding the factory code for your Ford F150 keyless entry system. Whether you’ve misplaced your code or just want to keep it handy for future use, we’ve got you covered.
How Do I Find the Factory Code for My Ford F150 Keyless Entry?
Finding the factory code for your Ford F150 keyless entry system is not as challenging as it may seem. Follow the steps below to retrieve the code:
1. Locate the Smart Junction Box (SJB)
The Smart Junction Box is the central hub for the electrical systems in your Ford F150. It is typically located under the dashboard on the driver’s side. Take a moment to identify the SJB’s position in your vehicle.
2. Remove the Fuse Box Cover
Once you have located the SJB, you will need to remove the fuse box cover. The fuse box cover is usually secured with clips or screws. Carefully unfasten any clips or screws and set them aside in a safe place.
3. Find the Security Module
Inside the fuse box, you will find the security module. The security module is a rectangular device with multiple connectors. It is responsible for managing the keyless entry system in your Ford F150.
4. Identify the Label on the Security Module
Look for a label or sticker on the security module. This label contains important information about your keyless entry system, including the factory code. The factory code is usually a five-digit number.
5. Record the Factory Code
Once you have located the factory code on the security module, make sure to write it down or take a clear photo of it. This will ensure that you have a backup of the code in case you need it in the future.
Can I Retrieve the Factory Code Without Removing the Fuse Box Cover?
While it is possible to retrieve the factory code without removing the fuse box cover, the process can vary depending on the model year of your Ford F150.
In some cases, you may be able to access the factory code through the vehicle’s onboard diagnostics system.
To retrieve the factory code without removing the fuse box cover, follow these steps:
1. Enter the Vehicle’s Diagnostic Mode
Start by inserting the key into the ignition and turning it to the “On” position without starting the engine. Then, press and hold the “Trip” button on the instrument cluster.
2. Cycle the Ignition
While still holding the “Trip” button, turn the key to the “Off” position and then back to the “On” position. Repeat this cycle three times within five seconds. End the cycle with the key in the “On” position.
3. Access the Factory Code
On the instrument cluster, you should see a series of numbers displayed. These numbers represent the different modules in your Ford F150.
Look for the module number corresponding to the keyless entry system and write down the displayed code.
Please note that this method may not work for all Ford F150 models, especially older ones.
If you are unable to retrieve the factory code using the diagnostic mode, it is recommended to follow the previous method of removing the fuse box cover to access the security module.
Conclusion
In conclusion, locating the factory code for your Ford F150 keyless entry system is a relatively straightforward process.
By following the steps outlined in this article, you can find the factory code either by removing the fuse box cover or using the vehicle’s diagnostic mode. Remember to record the code in a safe place for future reference.
READ ALSO!!!
English 
Spanish